Speaker Connection Plates

Products: 18 of 8
  • Round Recessed Speaker Binding Post Terminal Plate for Sub-Woofer Gold Plated

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Screw down binding posts
    Gold Plated Contacts
    Dimensions are as follows:
    Inner circle diameter - 68mm/2.7"
    Outer circle diameter - 99mm/3.9"
    Depth - 25mm/1"
    Use a 2 3/4" diameter drill to cut the correct size hole

    Not rated yet
    • $2.94
  • Round Recessed Speaker Metal Binding Post Banana Terminal Plate for Sub-Woofer

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Solid metal screw down binding posts
    Gold Plated Contacts
    Dimensions are as follows:
    Inner circle diameter - 68mm/2.7"
    Outer circle diameter - 99mm/3.9"
    Depth - 25mm/1"
    Use a 2 3/4" diameter drill to cut the correct size hole

    Not rated yet
    • $3.84
  • Round/Square Recessed Speaker Binding Post Banana Terminal Plate for Sub-Woofer

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Gold Plated Contacts
    Dimensions are as follows:
    Outer circle diameter - 68mm/2.7"
    Total diameter - 79mm/3.1" (square)
    Depth - 25mm/1"
    Use a 2 3/4" diameter drill to cut the correct size hole.

    Not rated yet
    • $2.94
  • Round/Square Recessed Speaker Metal Binding Post Banana Terminal Plate for Sub-Woofer

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Solid metal screw down binding posts
    Gold Plated Contacts
    Dimensions are as follows:
    Outer circle diameter - 68mm/2.7"
    Total diameter - 79mm/3.1" (square)
    Depth - 25mm/1"
    Use a 2 3/4" diameter drill to cut the correct size hole.

    Not rated yet
    • $3.84
  • Square/Rectangle Recessed Speaker Binding Post Banana Terminal Plate for Sub-Woofer

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Screw down binding posts
    Gold Plated Contacts
    Dimensions are as follows:
    Inner diameter - 72mm/2.8" by 53mm/2.0"
    Outer diameter - 92mm/3.6" by 79mm/3.1"
    Depth - 25mm/1"

    Not rated yet
    • $2.94
  • Square/Rectangle Recessed Speaker Metal Binding Post Banana Terminal Plate for Sub-Woofer

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Solid metal screw down binding posts
    Gold Plated Contacts
    Dimensions are as follows:
    Inner diameter - 72mm/2.8" by 53mm/2.0"
    Outer diameter - 92mm/3.6" by 79mm/3.1"
    Depth - 25mm/1"
    Not rated yet
    • $3.84
  • Square/Rectangle Recessed Twin Speaker Quad/4X Metal Binding Post Banana Terminal Plate for sub-woofer

    Making your own Twin sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder connections on back of each binding post.
    Solid metal screw down binding posts
    Removable Gold plated connection strips can be used to equalize the power to both speakers if needed in your setup
    Gold Plated Contacts
    Dimensions are as follows:
    Outer diameter - 95mm/3.8" by 75mm/3.0" (with out flange)
    Depth - 25mm/1"
    Flange - Sides 10mm/0.4" Top/Bottom 14mm/0.5"
    Cut hole to 95 X 75mm or 3.7 X 3 Inches to fit plate

    Not rated yet
    • $5.74
  • Round Recessed Speaker Terminal Plate/Cup with Spring Loaded Terminals

    Making your own sub-woofer/speaker? then you will need professional looking speaker connections to finish the job off.
    High quality with solder/spade connections on back of each connection.
    Spring loaded terminals
    Terminals are color coded and labeled
    Gold Plated Contacts
    Dimensions are as follows:
    Diameter - 75mm/2.95"
    Mounting hole size: 50mm (1.93")
    Depth (with tabs) - 31mm/1.22"
    Use a 2" diameter drill to cut the correct size hole

    Not rated yet
    • $1.84

Bestsellers