Electrical Components

Products: 115 of 72
  • 9V PP3 DIY Battery Clip With 1.35mm X 3.5mm DC Plug End for Spy/Mini CCTV Cam/Camera

    Connector A: Female PP3
    Connector B: Male 1.35mm X 3.5mm DC
    Great for school D&T/home projects for powering some lights and LED's

    Not rated yet
    • $1.54
  • Panel/Chassis Mount Female DC Power Connector 2.1mm X 5.5mm + Waterproof Dust Cap

    Connector A: Female 2.1mm X 5.5mm DC
    Connector B: Solder Tabs/Points
    Use for your DIY projects or device repair
    Fits through front and secures at the back with included metal nut
    Includes rubber dust cover (can be fitted with out dust cover if desired)
    Dimension (including solder tabs): Approx. 18.5mm x 10mm x 10mm.(L*W*H)

    Not rated yet
    • $0.94
  • Panel/Chassis Mount Female DC Power Connector 1.35mm X 3.5mm + Waterproof Dust Cap

    Connector A: Female 1.35mm X 3.5mm DC
    Connector B: Solder Tabs/Points
    Use for your DIY projects or device repair
    Fits through front and secures at the back with included metal nut
    Includes rubber dust cover (can be fitted with out dust cover if desired)
    Dimension (including solder tabs): Approx. 17.5mm x 10mm x 10mm.(L*W*H)

    Not rated yet
    • $0.94
  • 9V PP3 DIY Battery Clip With 2.1mm X 5.5mm DC Plug End for Spy/Mini CCTV Cam/Camera

    Connector A: Female PP3
    Connector B: Male 2.1mm X 5.5mm DC
    Great for school D&T/home projects for powering some lights and LED's

    Not rated yet
    • $1.54
  • Single/1X AA DIY Battery Holder Case Box Base 1.5V PCB Mount With Bare Wire Ends

    Single AA battery Slot Holder Case with wire leads for soldering / connecting
    Total Voltage with 1X 1.5V AA battery: 1.5V
    Curved over edges to hold battery securely in place.
    Lead Cable Length: 6 Inch
    Dimension: Approx. 58mm x 17mm x 13mm.(L*W*H)
    Screw hole for board mounting
    Color: Black

    Not rated yet
    • $0.94
  • Twin/2X AA DIY Battery Holder Case Box Base 3V Volt PCB Mount With Bare Wire Ends

    2X AA battery Slot Holder Case with wire leads for soldering / connecting
    Total Voltage with 2X 1.5V AA battery: 3V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 59mm x 33mm x 15mm.(L*W*H)
    2X screw hole for board mounting
    Color: Black

    Not rated yet
    • $1.34
  • Twin/2X AA DIY Battery Holder Case Box 3V With Power Switch & Bare Wire Ends

    Twin AA battery Holder Case with wire leads for soldering / connecting
    Slide on cover clips in place to secure batteries
    Power switch built in allows you to turn power on and off while leaving batteries inside.
    Total Voltage with 2X 1.5V AA battery: 3V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 68mm x 33mm x 18mm.(L*W*H)
    Color: Black

    Not rated yet
    • $2.14
  • Quad/4X AA DIY Battery Holder Case Box Base 6V Volt PCB Mount With Bare Wire Ends

    4X AA battery Slot Holder Case with wire leads for soldering / connecting
    Total Voltage with 4X 1.5V AA battery: 6V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 57mm x 33mm x 30mm.(L*W*H)
    Color: Black

    Not rated yet
    • $1.64
  • 6X AA DIY Battery Holder Case Box Base 9V Volt PCB Mount With Bare Wire Ends

    6X AA battery Slot Holder Case with wire leads for soldering / connecting
    Total Voltage with 6X 1.5V AA battery: 9V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 58mm x 47mm x 29mm.(L*W*H)
    Color: Black

    Not rated yet
    • $1.84
  • 8X AA DIY Battery Holder Case Box Base 12V Volt PCB Mount With Bare Wire Ends

    8X AA battery Slot Holder Case with wire leads for soldering / connecting
    Total Voltage with 8X 1.5V AA battery: 12V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 58mm x 62mm x 29mm.(L*W*H)
    Color: Black

    Not rated yet
    • $1.84
  • Black 9V Volt PP3 DIY Battery Holder Case Box Base PCB Mount With Bare Wire Ends

    Single Slots 1x 9V Battery Holder Case with wire leads for soldering / connecting
    Lead Cable Length: 6 Inch
    Dimension: Approx. 55mm x 30mm x 20mm.(L*W*H)
    3X screw hole for board mounting
    Color: Black

    Not rated yet
    • $1.49
  • Metal Panel/Chassis Mount Female DC Power Connector 2.1mm X 5.5mm

    Connector A: Female 2.1mm X 5.5mm DC
    Connector B: Solder Tabs/Points
    High Quality Metal Construction
    Use for your DIY projects or device repair
    Fits through front and secures at the back with included metal nut
    Dimension (including solder tabs): Approx. 27mm x 12mm x 12mm.(L*W*H)

    Not rated yet
    • $1.44
  • 8X AA DIY Battery Holder Case Box 12V With Power Switch & Wire DC Plug

    8 AA battery Holder Case with wire leads with 2.1mmX5.5mm DC Plug.
    Slide on cover clips in place to secure batteries
    Power switch built in allows you to turn power on and off while leaving batteries inside.
    Total Voltage with 8X 1.5V AA battery: 12V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 127mm x 72mm x 19mm.(L*W*H)
    Color: Black

    Not rated yet
    • $3.64
  • 4X AA DIY Battery Holder Case Box 4.8V/6V With Power Switch & Bare Wire Ends

    4 AA battery Holder Case with wire leads.
    Slide on cover clips in place to secure batteries
    Power switch built in allows you to turn power on and off while leaving batteries inside.
    Total Voltage with 4X 1.5V AA battery: 6V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 65mm x 70mm x 19mm.(L*W*H)
    Color: Black

    Not rated yet
    • $2.24
  • Twin/2X AAA DIY Battery Holder Case Box 3V With Power Switch & Bare Wire Ends

    Twin AAA battery Holder Case with wire leads for soldering / connecting
    Slide on cover clips in place to secure batteries
    Power switch built in allows you to turn power on and off while leaving batteries inside.
    Total Voltage with 2X 1.5V AAA battery: 3V
    Lead Cable Length: 6 Inch
    Dimension: Approx. 63mm x 25mm x 15mm.(L*W*H)
    Color: Black

    Not rated yet
    • $1.94
Products: 115 of 72

Bestsellers