Power Distribution
-
2-Way/2X AGU In-Line Fuse Holder Power Distribution Block Stereo/Audio/Car 10A-100A
Use one Power wire to have two separate protected circuits using this Twin AGU Fuse holder
Works on Cars, boats, RV's and more (DC current 12/24/32V)
Twin AGU Fuse Holder upto 100A for each
Gold plated contacts
Input Power side 1X 8.5mm hole (4AWG)
Output power side 2X separate 5.5mm hole (8AWG)
Dimensions: 100mm X 45mm X 30mm (4" X 1.8" X 1.2")
Weight: 150g (5.2oz) -
3-Way/3X AGU In-Line Fuse Holder Power Distribution Block Stereo/Audio/Car 10A-100A
Use one Power wire to have three separate protected circuits using this Triple AGU Fuse holder
Works on Cars, boats, RV's and more (DC current 12/24/32V)
Triple AGU Fuse Holder upto 100A for each
Gold plated contacts
Input Power side 3X 8.5mm hole (4AWG)
Output power side 3X separate 5.5mm hole (8AWG)
Dimensions: 100mm X 60mm X 30mm (4" X 2.4" X 1.2")
Weight: 228g (8.1oz) -
4-Way/4X AGU In-Line Fuse Holder Power Distribution Block Stereo/Audio/Car 10A-100A
Use one Power wire to have four separate protected circuits using this Quad AGU Fuse holder
Works on Cars, boats, RV's and more (DC current 12/24/32V)
Quad AGU Fuse Holder upto 100A for each
Gold plated contacts
Input Power side 3X 8.5mm hole (4AWG)
Output power side 4X separate 5.5mm hole (8AWG)
Dimensions: 100mm X 78mm X 30mm (4" X 3" X 1.2")
Weight: 304g (10.7oz) -
2-Way/2X AFS In-Line Fuse Holder Power Distribution Block Stereo/Audio/Car + Free AFS Fuses 10A-100A
Use one Power wire to have two separate protected circuits using this Twin AFS Fuse holder
Works on Cars, boats, RV's and more (DC current 12/24/32V)
Twin AFS Fuse Holder upto 100A
Gold plated contact
Input Power side 1X hole up to 4GA (8mm max)
Output power side 2X separate hole up to 4GA (8mm max)
Dimensions: 67mm X 52mm X 29mm (2.6" X 2" X 1.1") -
2-Way/2X ANL In-Line Fuse Holder Power Distribution Block Stereo/Audio/Car 80A-300A
Use one Power wire to have two separate protected circuits using this Twin ANL Fuse holder
Works on Cars, boats, RV's and more (DC current 12/24/32V)
ANL Fuse Holder upto 300A
Gold plated contacts
Input Power side 1X hole up to 1/0GA (13mm max)
Output power side 2X separate hole up to 4GA (8mm max)
Dimensions: Length 137mm (5.3") X Width 61mm (2.4") X Height 40mm (1.5") -
4-Way Car Audio Stereo Amp Power/Ground Cable Splitter Distribution Block 4ga to 8ga
Works on Cars, boats, RV's and more for Power Splitting
Removable Clear Plastic Protective shell
Will fit upto the following wire size: 1X 4AWG and 4X 8AWG
Hole sizes are as follows: Input = 8mm / Each output = 6.5mm
Solid Copper construction for safe power transfer
Gold Plated for best conduction
Course threaded gold plated grub screws to solidly secure wires -
4-Way Car Audio Stereo Amp Power/Ground Cable Splitter Distribution Block 2ga to 4ga
Works on Cars, boats, RV's and more for Power Splitting
Removable Clear Plastic Protective shell
Will fit upto the following wire size: 1X 2AWG and 4X 4AWG
Hole sizes are as follows: Input = 10mm / Each output = 8mm
Solid Copper construction for safe power transfer
Gold Plated for best conduction
Course threaded gold plated grub screws to solidly secure wires -
2-Way Car Audio Stereo Amp Power/Ground Cable Splitter Distribution Block 2ga to 4ga
Works on Cars, boats, RV's and more for Power Splitting
Removable Clear Plastic Protective shell
Will fit upto the following wire size: 1X 2AWG and 2X 4AWG
Hole sizes are as follows: Input = 10mm / Each output = 8mm
Solid copper construction for safe power transfer
Gold Plated for best conduction
Course threaded gold plated grub screws to solidly secure wires -
2-Way Car Audio Stereo Amp Power/Ground Cable Splitter Distribution Block 1/0ga to 4ga
Works on Cars, boats, RV's and more for Power Splitting
Removable Clear Plastic Protective shell
Will fit upto the following wire size: 1X 1/0AWG and 2X 4AWG
Hole sizes are as follows: Input = 12.5mm / Each output = 10.5mm
Solid copper construction for safe power transfer
Gold Plated for best conduction
Course threaded gold plated grub screws to solidly secure wires -
Standard ATM Mini Blade Fuse Tap/Breakout Holder Add a Circuit for Car/Motorcycle
Works on Cars, boats, RV's and more (DC current 12/24/32V) using the mini blade fuses design to allow you to add a new fuse protected circuit into an existing circuit. Great for adding in LCD's and other devices that you need to be protected and/or powered on with the ignition key.
Pre clamped ready to clamp onto your new circuits power wire
16AWG Wire with 105C rated insulation
Use for Upto 10A for the new fuse circuit depending on your setup -
Low Profile Mini Blade Fuse Tap/Breakout Holder Add a Circuit for Car/Motorcycle
Note: This is for low profile mini blade fuse setups
Works on Cars, boats, RV's and more (DC current 12/24/32V) using the mini blade fuses design to allow you to add a new fuse protected circuit into an existing circuit. Great for adding in LCD's and other devices that you need to be protected and/or powered on with the ignition key.
Pre clamped ready to clamp onto your new circuits power wire
16AWG Wire with 105C rated insulation
Use for Upto 10A for the new fuse circuit depending on your setup -
Positive Battery Terminal Power Distribution Connector with 2ga, 4ga and two 8ga output + Protective Cover for Car/boat/RV
High Quality Positive Battery Terminal Connector. Great for adding power out for Amps, lights and other devices.
Satin Nickel Finish
Has the following outputs:
1X upto 2ga (10.5mm)
1X upto 4ga (9.5mm)
2X upto 8ga (5.3mm)
Solid Metal construction for safe power transfer
Course threaded grub screws to solidly secure wires
Includes clear plastic protection cover to help avoid shorting and to keep terminal clean
Dimensions (with cover): 65 X 52 X 22mm (2.5 X 2 X 0.85 Inches) -
Negative Battery Terminal Power Distribution Connector with 2ga, 4ga and two 8ga output + Protective Cover for Car/boat/RV
High Quality Negative Battery Terminal Connector. Great for adding power out for Amps, lights and other devices.
Satin Nickel Finish
Has the following outputs:
1X upto 2ga (10.5mm)
1X upto 4ga (9.5mm)
2X upto 8ga (5.3mm)
Solid Metal construction for safe power transfer
Course threaded grub screws to solidly secure wires
Includes clear plastic protection cover to help avoid shorting and to keep terminal clean
Dimensions (with cover): 65 X 52 X 22mm (2.5 X 2 X 0.85 Inches) -
5/16" Ring Terminal Power Connector 4AWG 1/0AWG Gold Plated Ground
Connector A: 8mm (5/16") Ring Terminal
Connector B: Upto1/0AWG Bare wire screw down connection
Dimensions: (W X H X L) 55mm (2.1") X 19mm (0.75") X 19mm (0.75")
Thickness of ring terminal: 4mm (0.15")
Hold size of ring terminal: 8mm (0.3" or 5/16")
Use with up to 1/0ga wire (13.2mm max) or upto 4ga wire (9mm Max) using size reduce adapter
Course threaded grub screws to solidly secure wires
Gold Plated Contacts -
Negative Battery Terminal Power Distribution Connector with 1/0ga, 4ga and two 8ga output + Protective Cover for Car/boat/RV
High Quality Negative Battery Terminal Connector. Great for adding power out for Amps, lights and other devices.
Satin Nickel Finish
Has the following outputs:
1X upto 0ga (12.8mm)
1X upto 4ga (9.5mm)
2X upto 8ga (5.3mm)
Solid Metal construction for safe power transfer
Course threaded grub screws to solidly secure wires
Includes clear plastic protection cover to help avoid shorting and to keep terminal clean
Dimensions (with cover): 65 X 52 X 22mm (2.5 X 2 X 0.85 Inches)